O2k-PhotoBiology

The O2k PhotoBiology enables the following O2k-Applications:

oxygen consumption
photosynthesis
light-enhanced dark respiration

The O2k PhotoBiology also supports the following add-on O2k-Modules: O2k-Fluo Smart-Module, O2k-TPP+ ISE-Module, O2k-pH ISE-Module.

This package is available as a Power Package to increase throughput. Certain auxiliary tools and services are not included in Power Packages.
This package is also available without integrated PC. Certain items are not included in O2k-Packages without an integrated PC.

More details:
Compare packages

For O2k-J and higher, please use DatLab 8 to ensure proper operation and data acquisition for all O2k-Modules.

Award-winning innovation

Additional information

Oxygen	Respiration chambers with minimum oxygen diffusion • High-resolution of oxygen flux: ±1 pmol O₂ ∙s⁻¹∙mL⁻¹ in normoxia to anoxia • High-resolution of oxygen concentration: 5 nM • Long-term stability and linearity of the polarographic oxygen sensor (OroboPOS) • Barometric pressure transducer for accurate air calibration at any altitude
SUIT protocols	Standardized substrate-uncoupler-inhibitor-titration DL-Protocols • Real-time monitoring of respiratory rates and states • Multiple titrations within a single assay for in-depth analysis of mitochondrial fitness
MultiSensor	Additional parameters recorded real-time in combination with oxygen in the same chamber • Automatic and documented calibration routines, instrumental background tests, and mitochondrial assays supported by DL-Protocols
Temperature	4 to 47 °C; stability ±0.002 °C
Thermostat	Peltier temperature control
Chamber	Material: Duran glass Volume: 2 mL or 0.5 mL
Specialized DatLab Software	Installed on integrated computer for protocol design, control and data analysis
Max. power input	330 W
Current at 100-120 V	max. 3.0 A
Current at 220-240 V	max. 1.5 A
Power consumption	During standard operation with screen (when block temperature is stable at 37 °C and ambient temperature of 22 °C) approx. 45-50 W
Lab space required	The O2k requires a minimum of lab space (0.5 m bench space), with sufficient space for the ISS, Titration Set and handling. For maximum signal stability and optimal temperature control, the O2k should be placed in a position in which it is not exposed to direct sunlight and sudden changes of room temperature. Keep the space on the table below the O2k bottom clear to prevent any interference of ventilation beneath the O2k-Main Unit.

Configuration

O2k: Hardware and DatLab Software*

Stainless steel housing
Peltier thermostat 4 to 47 °C; ±0.002 °C
Barometric pressure transducer
2 Amperometric oxygen channels
2 ISE sockets for ion sensitive electrodes
2 Sockets for optical signals or NO
2 Sockets for Q-and NAD(P)H-Modules
2 Sockets for PB-Module
2 O2k-Chambers (2.0 mL, Duran® glass)
2 SmartPOS
2 stirrers (white PVDF) , electromagnetic control
2 stoppers (black PEEK) with O-ring
2 O2k-Chamber Holders (blue POM) with O-ring and V-ring
2 POS-Holders (blue POM)

Current DatLab version with free follow-up upgrades within the warranty period

O2k: Accessories and Consumables

1 ISS-Integrated Suction System, to remove medium from the O2k-Chamber
1 Oxia – the O2 regime controller for HyperOxia and HypOxia
1 O2k-Titration Set: Hamilton microsyringes; fixed needles with rounded tips (8 x 10 mm3 and 3 spare plungers, 6 x 25 mm3, 2 x 50 mm3, 1 x 100 mm3, 1 x 500 mm3), packed in syringe storage box with syringe labels, 2 x syringe racks with syringe collars, 2 x tube racks
1 MiR05-Kit: Mitochondrial Respiration Medium. For a final volume of 250 mL
1 Pkg. POS-Seal Tip
2 Pkg. POS-Membranes
1 POS-Electrolyte Powder
1 POS-Mounting Tool
1 Polishing Cloth
1 Polishing Powder 0.3 μm
1 O2-Zero Powder
1 Forceps for membrane application
1 Pipette Plastic ungraded
1 Pkg. Conditioning cloths for stainless-steel housing

Ok2-PB-Module: for conducting measurements of PhotoBiology, including photosynthesis
6 PhotoBiology light sources – PB-Light Sources (2 blue, 2 red and 2 white)

O2k-TIP2k-Module: add-on for two-channel operation with the O2k with automatic control by DatLab of programmable titration regimes and feedback control

4 Micro-injection syringes, 200 mm3, 180 mm needle length, 0.12 mm inner Ø; fixed needles with rounded tip
1 Pkg. Needle Spacers, silicone stops (200/Pkg.) with mounting tool
1 TIP2k-Needle Safety Support with cable guide
1 Pkg. TIP2k-Filter Papers (10/Pkg.)

Included extras

Packing, handling, worldwide shipping
Remote support from Oroboros experts
1 Installation and startup support session (remote, to be used within the warranty period)
1 O2k-Workshop registration fee for the participation of one lab member waived (to be used within the warranty period)
3-year warranty
* Integrated computer with touch screen (15,6″; FHD 1920×1080) connects DatLab to the O2k
* Keyboard set, webcam and webcam accessories

All trademarks used are properties of their respective owners.

Bioblast resources

Visit Bioblast where you will find further relevant information:

• O2k manual
• PB-Module manual

Additional information

Configuration

Bioblast resources

Subscribe to Oroboros Communications